Signalization on the Opener

Nuki Opener - LED Signalization:


State

LED Signalization

Booting

The LED is permanently glowing.

Bus-signal recording

The LED flashes 2x every second.

Maintenance Mode

The LED flashes 1x every second.

Pairing mode
The Opener can be connected with other Bluetooth devices.

The LED is permanently glowing.

Ring To Open is active

The LED flashes 1x every 5 seconds.

Continuous Mode (During door opening)

The LED flashes 2x per second.

Continuous Mode (Ring to Open active)

The LED flashes 2x every 5 seconds.

Door Mode “undefined”

The LED flashes 6x every 15 seconds.

Door Mode “Untrained”

The LED flashes 4x every 15 seconds.

Uninitialized

The LED flashes 5x every 15 seconds.
Battery state critical
Please replace the batteries.

The LED flashes 2x every 15 seconds.

Updating firmware

The LED flashes 2x per second.



Was this article helpful?



Contact us

Support Hotline
International: +1 (915) 600-7233
Germany: 0800 880 8710
Austria: +43 720 880010
Switzerland: 0800 880 871
United Kingdom: +44 1688 212012
   
Mon-Fri: 9am-6pm (CET)

Email Support Send us an email, if you have any questions.
We are happy to help.


Support Request

Nuki Pro Support